Language
English
français
العربية
中文
sales@szleadray.com
+86-13424390319
- Solar Outdoor Lighting
- Integrated Solar Street Lights
- Solar lighting
- Supplier in China
- Solar Garden Light manufacturer
- All in One Solar Street Lamp
- Integrated solar street lights and semi solar road
- LED Rechargeabl Floodlight with Bluetooth
- The Development Trend of Solar Energy Industry
- How long is the life of multifunctional solar street lights and what maintenance is required?
- What points should be considered when buying multi-functional solar LED street lights?
- What are the advantages of solar street light with monitoring system?
- Analysis at the Development Trend of Solar Street Lights
- What are the advantages of intelligent street light monitoring system?
- solar street light
- Integrated Solar Street Light
- All in One solar street light
- Solar Led Street Light
- Solar Street Light Factory
- Integrated Solar Parking Lot Lights
- Integrated Solar Billboard Lights
- China Solar Lighting Supplier
- All In One Solar LED Street Lamp
- Outdoor Waterproof Solar Road Lighting
Categories
New blog
Tags
Integrated Solar Street Lights
How to choose solar light
- 2017-04-10 08:46:45
Main character for solar light:
A. LED: Unit: lm
Normally 1W LED=100lm, we use 130lm/W for bright lighting and save power.
You should choose high lumens instead of high watts. More lumens means higher brightness.
B. Battery: unit WH, or Volts & AH
Li-ion battery: higher energy density & low weight compare with acid.
More safety as below testing:
Vibration test:
Place the full charged battery on the shaking platform, vibrate 30mins as below:
Displacement amplitude: X Axis 0.38mm, Y Axis 0.19mm
Frequency: X Axis 10 to 30 Hz, Y Axis 30 to 50 Hz
Result: no leakage, no air leakage, no explosion, no fire, no influence for performance and appearance.
Drop test:
Drop the full charged battery from 1m height to 5cm hard wood on the floor, and drop it twice by different side
Result: no leakage, no air leakage, no explosion, no fire, no influence for performance and appearance.
High-temperature test:
Place the full charged battery in the oven, increase the temperature to 135±2oC by the rate of 5±2oC/mins and keep the temperature for 10mins
Result: no fire, no explosion
Short circuit test:
Place the full charged battery into fume cupboard, short out positive and negative pole (total resistor below 50 m?), watch the change of the battery temperature, and finish the test when temperature drop 10oC compare to the peak temperature.
Result: no fire, no explosion
Over charge test:
Full discharge the battery and lay aside for 10mins
Full charge the battery and lay aside for 10mins
Charge the battery by 1C current and setup the cut-off voltage at 4.8V
Result: no fire, no explosion
Impact test:
Place a ∮15.8mm steel bar at the middle of the battery
Free fall a 10Kg hammer from 1m height to the steel bar
Result: no fire, no explosion
Solar panel：unit: W
how to calculate solar power:
for example:
solar panel 6V 10W
formula: A=W/U, A=10W/6V=1.67A, solar panel output is 6V 1.67A
What is the efficiency of the solar cell:
place 1㎡ solar cell in the sunlight which power is 1000W, the solar cell can produce 170W power, so the efficiency is 170W/1000W=17%.
How to choose the solar cell:
solar cell have 2 types: mono and poly crystalline, the efficiency is 17% and 16%.
When we need more power in specified area, we choose mono crystalline.
If we just need the same power in specified area, we choose poly crystalline, because poly is cheaper than mono, and they can produce the same power at same condition.
A. LED: Unit: lm
Normally 1W LED=100lm, we use 130lm/W for bright lighting and save power.
You should choose high lumens instead of high watts. More lumens means higher brightness.
B. Battery: unit WH, or Volts & AH
Li-ion battery: higher energy density & low weight compare with acid.
More safety as below testing:
Vibration test:
Place the full charged battery on the shaking platform, vibrate 30mins as below:
Displacement amplitude: X Axis 0.38mm, Y Axis 0.19mm
Frequency: X Axis 10 to 30 Hz, Y Axis 30 to 50 Hz
Result: no leakage, no air leakage, no explosion, no fire, no influence for performance and appearance.
Drop test:
Drop the full charged battery from 1m height to 5cm hard wood on the floor, and drop it twice by different side
Result: no leakage, no air leakage, no explosion, no fire, no influence for performance and appearance.
High-temperature test:
Place the full charged battery in the oven, increase the temperature to 135±2oC by the rate of 5±2oC/mins and keep the temperature for 10mins
Result: no fire, no explosion
Short circuit test:
Place the full charged battery into fume cupboard, short out positive and negative pole (total resistor below 50 m?), watch the change of the battery temperature, and finish the test when temperature drop 10oC compare to the peak temperature.
Result: no fire, no explosion
Over charge test:
Full discharge the battery and lay aside for 10mins
Full charge the battery and lay aside for 10mins
Charge the battery by 1C current and setup the cut-off voltage at 4.8V
Result: no fire, no explosion
Impact test:
Place a ∮15.8mm steel bar at the middle of the battery
Free fall a 10Kg hammer from 1m height to the steel bar
Result: no fire, no explosion
Solar panel：unit: W
how to calculate solar power:
for example:
solar panel 6V 10W
formula: A=W/U, A=10W/6V=1.67A, solar panel output is 6V 1.67A
What is the efficiency of the solar cell:
place 1㎡ solar cell in the sunlight which power is 1000W, the solar cell can produce 170W power, so the efficiency is 170W/1000W=17%.
How to choose the solar cell:
solar cell have 2 types: mono and poly crystalline, the efficiency is 17% and 16%.
When we need more power in specified area, we choose mono crystalline.
If we just need the same power in specified area, we choose poly crystalline, because poly is cheaper than mono, and they can produce the same power at same condition.
